Toshiba QOSMIO E10 Maintenance Manual page 296

4 Replacement Procedures
10. Stick the protection cover S (A) and two fixing tapes (B), (C).
Stick the tape according to the outline of the LCD module. Make
sure the tape does not appear on the side of the module.
Figure 4-69 Replacing Sharp fluorescent lamp (XGA) (23)
4-88
Fit the cover
according to the
outline of the screw.
Fit the cover
according to the
outline of the
The tape MUST NOT appear on the display.
4.25 Fluorescent Lamp
QOSMIO E10 Maintenance Manual (960-492)