Toshiba QOSMIO E10 Maintenance Manual page 201

3.29 SETUP
9. Drives I/O
This option displays the address and interrupt level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
Built-in HDD
CD-ROM
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS
11. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
(b) Hard Disk Mode
Use this option to select the hard disk mode.
Enhanced IDE (normal)
Standard IDE
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.
QOSMIO E10 Maintenance Manual (960-492)
This cannot be changed.
This cannot be changed. This is not displayed when a drive
is not built-in.
= IRQ10, IRQ11
Enables the touch pad. (Default)
Disables the touch pad.
Select this mode when the HDD is used for MS-DOS,
Windows 95/98/2000/XP, or OS/2.
Select this mode when using an OS which does not
support the Enhanced IDE. When this mode is selected,
up to 528MB is logically available and the rest of the
capacity is not usable.
3 Tests and Diagnostics
(Default)
3-89