Cd Sound (Standard) Test - Toshiba QOSMIO E10 Maintenance Manual

3.28 Sound Test program
3.28.3

CD Sound (Standard) test

To execute the CD Sound (Standard) test, select 3 and press Enter. Insert the test media
(TOSHIBA TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the
test media can not be prepared) and the following menu appears in the display.
For the use of test media, refer to the 3.28.3.1 Test media (Toshiba-made test media).
For the use of audio CD on the market, refer to the 3.28.3.2 Audio CD.
3.28.3.1 Test media (Toshiba-made test media)
CD/DVD TEST
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
01 – Japanese Narration
02 – English Narration
03 – Test Tone A (100Hz – 20Hz)
04 - Test Tone B (400Hz – 3KHz L-R)
Subtest01 Japanese Narration
Selected this subtest, narration in Japanese starts and the following message
appears in the display.
Play start CD sound !
Press any key <Play stop>.
Press any key to stop the narration. Then return to the CD Sound (Standard)
test menu.
Subtest02 English Narration
QOSMIO E10 Maintenance Manual (960-492)
IN PROGRESS XXXXXXXX
ERROR COUNT: XXXXX
READ DATA
STATUS
Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
3 Tests and Diagnostics
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] ; test end
[Ctrl]+[C]
: XX
: XXX
= XXXXXXXX]]
; key stop
3-75