4 Replacement Procedures
4.11.2 Microphone
Removing the Microphone
The following describes the procedure for removing the microphone (See Figure 4-21).
1. Remove the following screw securing the microphone hold guide.
• M2×4Z
2. Detach the microphone from the microphone hold guide.
Installing the Microphone
The following describes the procedure for installing the Microphone (See Figure 4-21).
1. Install the microphone to the Microphone Hold Guide.
2. Install the Microphone Hold guide along the guide and secure it with the following
screw.
• M2×4Z
4-38
BIND screw
M2x4Z BIND
Figure 4-21 Removing the microphone
BIND screw
4.11 SJ board/Microphone
x1
Microphone Hold Guide
Microphone
x1
QOSMIO E10 Maintenance Manual (960-492)