H/W(Hardware) Initial Information Setting Tool - Toshiba QOSMIO E10 Maintenance Manual

3 Tests and Diagnostics
EXPANSION TEST
CD-ROM/DVD-ROM TEST
Other tests are:
LAN/Modem/Bluetooth/IEEE1394 TEST (LAN/Modem/Bluetooth/IEEE1394 TEST
disk)
Wireless LAN TEST (Wireless LAN TEST disk)
Sound TEST (Sound TEST disk)
You will need the following equipment to perform some of the Diagnostic test programs.
USB FDD
The Diagnostic Disks (T&D for maintenance, LAN/Modem/Bluetooth/IEEE1394 for
maintenance, wireless LAN for maintenance and Sound for maintenance)
A formatted working disk (Floppy disk test)
A cleaning kit to clean the floppy disk drive heads (Head Cleaning)
A PC card wraparound connector (Expansion test)
An external CRT monitor (Expansion test)
A CD test media (TOSHIBA CD-ROM TEST DISK) (Sound test)
A CD test media (ABEX TEST CD-ROM) (Sound test)
A DVD test media (DVD-ROM TEST DISK TSD-1) (Sound test)
A music CD (Sound test)
A USB test module (Keyboard test)
A USB cable (Keyboard test)
LAN wraparound connector (LAN test)
Module cable and RJ11 connector checker (Modem test)
Headphones (Sound test)
A microphone (Sound test)
A PC for wraparound test (Wireless LAN test)
3.1.2 H/W (Hardware) initial information setting tool
The H/W initial information setting tool consists of the following programs.
Initial configuration
Region write
System configuration display
E2PROM test (MAC/GUID/DMI)
You will need the following equipment to perform some of the programs.
The Diagnostics Disk (Main T&D)
A LAN wraparound connector (E2PROM test)
3-2
3.1 The Diagnostic Test
QOSMIO E10 Maintenance Manual (960-492)