３・４Ch - Ko Propo EX-RR Instruction Manual

● 3・４CH operation
※ Factory default setting for 3CH is set to 5WAY and
the 4CH is set to 2WAY.
※ The function to set the 3CH and 4CH is the same.
Please set and adjust these settings according to
use.
Example
Configuring 3CH to 3WAY and operating with
the use of ET5.
① From the initial screen select FUNCTION and
press the ENTER key.
MONITOR
STEERING
THROTTLE
STEERING THROTTLE
FUNCTION
② From the FUNCTION menu, select 3.4CH and
press the ENTER key.
FUNCTION
MODEL
TRMSET
3・４CH
③ In the 3CH MODE, select 3WAY.
３CH MODE
３WAY
SET
４CH MODE
２WAY
SET
④ Select SET and press the ENTER key.
３CH MODE
3WAY
SET
４CH MODE
２WAY
SET
FH-G DR5.8ｖ
MODEL NO.01
TIMER KEYSET
SYSTEM
3・4CH
GYRO
OFF
TWIN
2WAY
４WS
3WAY
AMP
5WAY
T-MIX
ANLOG
3・4CH
GYRO
OFF
2WAY TWIN
４WS
3WAY
AMP
5WAY
ANLOG T-MIX
⑤ 3CH MODE: Because 3WAY configuration menu is
displayed, each setting can now be modified.
3CH MODE : 3WAY
START : POS1
KEY : ET5
ー
【Configuration Example】
START：POS ２ ⇒ POS1 へ （Default：POS2）
Initial position when activating is set.
KEY：OFF ⇒ ET5 （Default：OFF）
The key that will operate the 3CH is set to ET5.
POS １：-100 ⇒ 0 （Default：100）
Output position of position 1 (closed) is set.
POS ２： 0 ⇒ 12 （Default：0）
Output position of position 2 (slightly moving) is
set.
POS ３：100 ⇒ 58 （Default：100）
Output position of position 3 (open) is set.
The above mentioned setting is an example.
Please set and adjust according to use.
For a detailed configuration manner, please access
▶ 3WAY (p.30).
Example
Setting 4CH for twin servos.
① From the initial screen select FUNCTION and
press the ENTER key.
② Select the ３・４CH setting from the menu and
press the ENTER key.
③ 4CH MODE is set to TWIN.
３CH MODE
３WAY
SET
４CH MODE
TWIN
SET
④ 4CH SE T is selected and press the ENTER key.
⑤ 4CH MODE: Because the TWIN setting menu
is displayed, each setting can now be modified.
3CH MODE ： TWIN SERVO
LEFT −ST
（１CH）
L・LEFT 70％
L・RIGHT 70％
L・SPEED 100％
L・TRIM 0
For a detailed configuration manner, please refer to
▶ TWIN SERVO (p.32).
11
POS1 :
POS2 : 12
POS3 : 58
+
3・4CH
GYRO
OFF
TWIN
2WAY
４WS
3WAY
AMP
5WAY
T-MIX
ANLOG
RIGHT ー ST
NORM
R・LEFT 70％
R・RIGHT 70％
R・SPEED 100％
R・TRIM 0
0