Calculator; Sound; Vr Information - Ko Propo EX-RR Instruction Manual

SYSTEM menu

▶ CALCULATOR

Calculate the gear ratio.
CULCULATOR ケイサンキ
SPUR GEAR
ｽﾊﾟｰ
PINIONGEAR
/ﾋﾟﾆｵﾝ
TRANSRATIO
x2ｼﾞｹﾞﾝｿｸ
【Setting Range】
SPUR GEAR : 1 〜 999（Default: 110）
PINIONGEAR : 1 〜 999（Default: 30）
TRANSRATIO : 1.00 〜 99.99（初期値 : 2.00）
TIRE DIAMETER タイヤ径 :0.00 〜 200.99（Default: 63.00）
【How to use】
When the spur, pinion and transmission ratio are
inputted, the gear ratio is automatically calculated
and shown in the picture right side of the displays.

▶ SOUND

Adjusts the sound level of the transmitter buzzer.
ＳＯＵＮＤ サウンド
BUZZER TONE
ｵﾝﾃｲ
BUZZER PATTERN
ﾊﾟﾀｰﾝ
BUZZER VOLUME
ﾎﾞﾘｭｰﾑ
【Setting Range】
BUZZER TONE : 1 〜 7（Default: 2）
BUZZER PATTERN : 1 〜 7（Default: 1）
BUZZER VOLUME : 0 〜 5（Default: 5）

▶ VR INFORMATION

Adjust the potentiometer of the steering and throttle.
※ Please set it by all means.
○ When using EX-RR for the first time.
○ When changing a steering unit for a different
product or when putting it back together.
○ When changing a grip unit for a different product
or when putting it back together.
○ When changing a grip unit for a different product
or when putting it back together.
1, Select [FUNCTION] on the initial screen
and push the ENTER key.
2, Select [SYSTEM] on the function screen
and push the ENTER key.
110
FINAL
RATIO
30 ｷﾞﾔﾋ
7.333
2.00
2
1
5
3.Select [VR INFO] on the system screen
and push the ENTER key.
VR INFOMATION
VR INFOMATION VRｲﾝﾌｫﾒｰｼｮﾝ
ST- LEFT
ST- LEFT
NUT ｾﾝﾀｰ
NUT
RIGHT
RIGHT
TH- HI ｾﾞﾝｼﾝ
TH- HI
NUT
ｾﾝﾀｰ
NUT
LOW
ﾌﾞﾚｰｷ
LOW
4.Move the wheel slowly to the full left and
right lock (numbers will change as the
steering is moved) and release the wheel
back to neutral.
Left MAX
5, Move the trigger slowly to the full throttle
and full brake positions (numbers will
change as the throttle is moved) and
release the trigger back to neutral.
6, Select the "YES" on the right side of the
display screen.
VR INFOMATION
ST- LEFT
NUT
RIGHT
TH- HI
NUT
LOW
※ When operating the VR INFORMATION and
pressing the BACK key will cancel the operation.
If you modify the decrease angular adjuster
P
for the wheel, please configure it so that the
ST-LEFT and RIGHT values do not have a large
difference.
If the numerical values differ
largely, readjust the screws
of the decrease angular
adjuster and perform
the VR information
configuration again.
When the numerical
value is small,
... loosen
Do not operate steering wheel and throttle trigger while
pressing ENTER, as this may change the data values
and affect subsequent operations. If this function is not
adjusted properly, improper operation may result.
VR Information timing may vary depending on usage. If
problems persist even after using VR Infomation, contact
KO Propo Customer Service Department to arrange
repairs. (We recommend that you contact KO Propo
Customer Service Department if you are not sure what
the problem is.)
38
ｘｘｘｘ
ﾋﾀﾞﾘ 2204
ｘｘｘｘ
2198
2
ｘｘｘｘ
2194 OK?
ﾐｷﾞ
OK?
ｘｘｘｘ
YES
2078
YES
ｘｘｘｘ
2075
ｘｘｘｘ
2072
Right MAX
Hold
Full Throttle
Hold
Full Brake
1 7 6 0
◇
-1 7 5 2
OK?
1 2 8 6
YES
◇
- 5 9 9
When the numerical
value is large,
... tighten