Colored Grip And Pad Replacement; Unit Connector; Power Switch; Charger Jack - Ko Propo EX-RR Instruction Manual

● Colored Grip and Pad Replacement
Colored grip pad (optional) and Large/small grip pad
options are available.
《How to change》
Remove the two screws on each side of the grip to
detach the grip plates, then attach the colored grip
and pad.
Make sure the battery box or battery pack is removed
before replacing the colored grip and pad.
The tabs on the colored grip and pad are to be inserted
into holes. Note the direction.
Note direction of the grip plate.
● Unit Connector
This product may be dismantled and therefore each
unit features their respective connectors. Dirty or
damaged connectors may result in malfunctions, so
please handle them carefully.
Do not touch the unit connectors with your fingers.
If connectors become corroded due to grime, they
may become inoperable. If storing the transmitter in
dismantled form. After prolonged use, a black residue may
build up on the connectors. Use cotton swabs dipped in
cleaning alcohol to remove. KO Propo's Customer Service
Department also handles transmitter maintenance.
● Power Switch
This product features a safety lock. The Master Unit
and Grip Unit cannot be detached when the Power
Switch is in the ON position. Turn off the transmitter
before dismantling.
Disassembly is not possible when the power is switch
ON. Forcefully trying to remove the Grip Unit while on
will result in damaging the locking mechanism.

Power Switch

● Charger Jack
Using the charging jack, you can charge different
batteries. When using the Xpansion and an expert
grip unit,A battery stand, a rechargeable battery, a
battery charger are necessary.
《How to Recharge》
① Confirm that the power switch is in the OFF
position. If only using the Grip Unit, make sure that
the connector cover is in place.
② Make sure the battery is securely connected. If the
connection is loose, the battery may not charge
completely. Securely connect the charger plug to
the charger jack.
③ Begin charging using a current of less than 1A.
Make sure the power switch is in the OFF position when
charging.
If only using the Grip Unit, make sure that the connector
cover is in place.
A short circuit may occur if the connector makes contact
with metal and lead to a serious accident.
Use a current of less than 1A to charge.
Do not connect/disconnect the battery during charging.
Take note of the charger plug's polarity in order to avoid
damage.
Do not attempt to charge if using alkaline batteries.
Doing so may result in battery leakage or cracking which
will damage the transmitter.
[Balancing or Discharging the Battery Pack]
If using a battery pack, please note that it cannot be
discharged via the charger jack. Remove the battery pack
from the transmitter to discharge it.
After reading the battery pack manual, please use your
battery.discharged via the charger jack. Remove the
battery pack from the transmitter to discharge it.
13
Quick Charger (Sold Separately)