Th Turn; Th Return 100; Th Speed - Ko Propo EX-RR Instruction Manual

TH SPEED Throttle Speed
Settings related to throttle control.
TH SPEED スピード
TH TURN
ﾀｰﾝｽﾋﾟｰﾄﾞ

TH RETURN 100 %

ﾘﾀｰﾝｽﾋﾟｰﾄﾞ
▶ TURN L>M ターン L>M
The range of movement of the throttle for L and M speed
settings can be set.
▶ TURN M>H
The range of movement of the throttle for M and H
speed settings can be set.
▶ TURN L
Speed from neutral ~ TURN L of the throttle can be
slowed down.
▶ TURN M
Speed from TURN L ~ TURN M of the throttle can be
slowed down.
▶ TURN H
Speed from TURN M ~ TURN H of the throttle can be
slowed down.
▶ RETURN H>M
Speed of the return of the throttle from H ~ M can be
slowed down in this range.
▶ RETURN M>L
Speed of the return of the throttle from M ~ L can be
slowed down in this range.
▶ RTRN H
The return speed of the range for H ~M can be set.
RTRN M
The return speed of the range for M ~L can be set.
▶ RTRN L
The return speed of the range for L ~neutral can be set.
100 %
▶ TH TURN Throttle Turn Speed
This function delays the conversion of the throttle
control signal to make the car easier to control.
【Setting Range】
TURN L>M : 1 〜 100％ （Default: 30%）
TURN M>H : 1 〜 100％（Default: 80%）
TURN L : 1 〜 100％
TURN M : 1 〜 100％
TURN H : 1 〜 100％
【Example】
If the car spins or otherwise does not drive straight
when the throttle is applied suddenly, limiting the
throttle speed can be effective.
Effective speed values are dependent on the speed
P
characteristics of your selected servo.
P When the setting is set to have TURN L>M and TURN
M>H to the same value, TURN M is displayed as OFF
and is not available to set. In this case only TURN L and
TURN H settings becomes effective.
When TURN L>M = 100% configuration is set, TURN M
P
and TURN H are displayed as OFF and are not available
to be set. In this case only TURN L will be used for the
setting since it is the largest value.
TH RETURN Throttle Return Speed
This function delays the conversion of the throttle
control signal to make the car easier to control.
※ Throttle return speed is effective in the range of
the throttle going from the high point to neutral.
【Setting Range】
RETURN H>M : 1 〜 100％ （Default: 80%）
RETURN M>L : 1 〜 100％ （Default: 30%）
RETURN H : 1 〜 100％
RETURN M : 1 〜 100％
RETURN L : 1 〜 100％
▶
【Example】
If the car spins or otherwise does not drive straight
when the throttle is applied suddenly, limiting the
throttle speed can be effective.
Effective speed values are dependent on the speed
P
characteristics of your selected servo.
Return speed is null in the operating range of the brake.
P
TH FEEL B (P.50) is used t o ad just the brake feeling.
48
（Default: 100%）
（Default: 100%）
（Default: 100%）
Operation of Turn Speed
▶
Neutral
TURN L Speed
TURN L>M
TURN M Speed
TURN M>H
TURN H Speed
▶
Throttle Max
（Default: 100%）
（Default: 100%）
（Default: 100%）
Operation of Return Speed
▶
Neutral
RETURN L Speed
TURN M>L
RETURN M Speed
TURN H>M
RETURN H Speed
▶
Throttle Max