Atstart - Ko Propo EX-RR Instruction Manual

ATSTRT Throttle Auto-Start
This function sets the throttle output to a fixed
level at startup, regardless of how much the throttle
trigger is pulled.
AUTOSTART オートスタート
N
F
【Setting Range】
KEY : OFF、ET1 〜 5、BT1（Default: OFF）
TRG.P : 5 〜 100%（Default: 5%）
FORWARD : 0 〜 100%（Default: 100%）
【Example】
Launching from the starting line.
① Assain KEY (ET1-5/BT1).
② Operate an assigned key and validate [autostart]
③ Operate the throttle trigger and the launching
starts when throttle trigger reaches [TRG.P].
The function will not operate until the throttle trigger
P
reaches the set position.
When the throttle is released, the function is deactivated
P
and the throttle returns to normal operation.
[AUT] Display on the Function Monitor!
P
If the key assigned to Auto-Start is pressed, [AUT] will
be displayed on the initial screen's function monitor. If
this key is pressed while at the initial screen, [AUT] will
disappear from the function monitor.
Normally, full throttle is set for launching from the
starting line. However, tire and surface conditions may
mean full throttle will not be effective. Conduct tests and
make adjustments.
KEY
キー 0FF
TRG.P
%
５
ﾎﾟｼﾞｼｮﾝ
FORWARD
B ﾊﾟﾜｰ １００ %
52