St Speed; St Turn - Ko Propo EX-RR Instruction Manual

ST SPEED menu
Modify the speed of the steering servo movement.
ST SPEED スピード
ST TURN 100
ﾀｰﾝｽﾋﾟｰﾄﾞ
ST RETURN 100%
ﾘﾀｰﾝｽﾋﾟｰﾄﾞ
▶ TURN POS Steering Turn Position
The range of movement of the steering wheel for TURN1
and TURN2 speed settings can be set.
▶ TURN １ Steering Turn Speed １
The speed from neutral to TURN POS range of the
steering wheel movement is set.
▶ TURN ２ Steering Turn Speed 2
The speed from TURN POS to end point range of the
steering wheel movement is set.
▶ RETURN POS Steering Return Position
The range of movement of the steering wheel for
returning to neutral for RTRN1 and RTRN2 speed
settings can be set.
▶ RTRN １ Steering Return Speed 1
The speed of the return from RETURN POS to neutral of
the steering is set.
▶ RTRN ２ Steering Retuen Speed 2
The speed of the return from end point range to
RETURN POS of the steering is set.
▶ ST TURN Steering Turn Speed
This is the function which restricts the maximum
speed of the steering servo. You configure the
direction (TURN) of the steering movement.
Neutral
%
End point
【Setting range】
TURN POS : 1 〜 100%（Default: 50%）
TURN １ : 1 〜 100%（Default: 100%）
TURN ２ : 1 〜 100%（Default: 100%）
【Example】
When the behavior of the car steering is hard to
handle, reducing the operational speed can allow the
operation of steering to become easier.
Take into account such factors as the servo used, car,
P
driving surface, etc. when adjusting all settings. Conduct
test drives to find the best setting values.
Effective speed values are dependent on the speed
P
characteristics of your selected servo.
When setting POS=100%, TURN2 cannot be set
P
because POS is now the entire movement range.
▶ ST RETURN Steering Return Speed
This is the function which restricts the maximum
speed of the steering servo return back to neutral.
You configure the direction (RETURN) of the steering
movement.
Neutral
【Setting Range】
ST RETURN SPEED : 1 〜 100%（Default: 100%）
Take into account such factors as the servo used, car,
P
driving surface, etc. when adjusting all settings. Conduct
test drives to find the best setting values.
Effective speed values are dependent on the speed
P
characteristics of your selected servo.
When setting POS=100%, TURN2 cannot be set
P
because POS is now the entire movement range.
Elapsed Time
Full Lock
Wheel Operation
Begin Turn
Neutral
Elapsed Time
Full Lock
Servo Movement
Neutral
Different values will affect the graph's appearance
43
End point
Quick Operations
Return
Speed Position
Servo Speed