■ Procedures Prior to Operation
1.Switching On
After ensuring that it is safe to do so,
followed by the receiver or Mini-Z.
2.Model Confirmation
Confirm the model which will be used.
3.Checking Movements
With the model's wheels lifted off the ground, operate transmitter to
check for proper movement. While driving, use steering and throttle
trims to make fine adjustments. Drive in a figure 8 pattern to check
steering balance.
4.Switching Off
After a driving session,
followed by the transmitter.
After switching off, wait at least 5 seconds before switching on again to ensure proper operation.
Figure 8 Pattern
Stand
switch off the receiver (or Mini-Z),
switch on the transmitter
Remove the battery pack from the model.
14
Trim