Table of Contents
Advertisement
The manual describes the optional SBI-DN card for connecting of inverters and
converters to DeviceNet networks.
Drives belonging to TPD32-EV series can be connected in network through the
SBI-DN board.
This manual is intended for design engineeres and technicians responsible for the
maintenance, commissioning and operation of DeviceNet systems.
A basic knowledge of DeviceNet is assumed and may be found in the following
manuals:
-
DeviceNet Specifications. Volume 1 - DeviceNet Communication Model and
Protocol (Issued by ODVA).
-
DeviceNet Specifications. Volume 2 - DeviceNet Device Profiles and Object
Library (Issued by ODVA).
1.1 THE MANUAL
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
1.2 DEVICENET GENERAL DESCRIPTION
DeviceNet is a profile of communication for industrial systems based on CAN.
As protocol CAN (ISO 11898) is used CAN2.0A with the 11 bit identifier.
The SBI board is developed as "Slave UCMM Capable Device" for operating only
in "Predefined Master/Slave Connection Set".
The data transfer is carried out cyclically; the Master unit reads the data supplied
——————
SBI-DN
1.0 INTRODUCTION
Dimensions, board mechanical installation, electric
connections and Dipswitch setting.
DeviceNet functions: description of the objects control-
led by the board, data transfer via "Explicit messaging".
"Polling" operations for the exchange of Drive para-
meters between the Master and the interface board
(M->S and S->M)
Setting of virtual digital I/Os
Error codes
Keypad menus
Definitions and references.
Interface Board DeviceNet
——————
7
Advertisement
Table of Contents
