Write Entire Virtual Digital Input Configuration; Write Entire Virtual Digital Input Configuration - Reply Ok; Write Entire Virtual Digital Input Configuration - Reply Error - gefran SBI-DN Instruction Manual

DATA TYPE
Byte
1)

5.1.6.1.4 Write Entire Virtual Digital Input Configuration

The data frame for the writing of the entire configuration of the "Virtual Digital Inputs"
is composed as follows:
DATA TYPE
Byte
1)
See Note
Word
Byte or Word depending on the type of allocation executed by the Master.
1)
The format of the Drive parameter index is Low Byte - High byte.
2)

5.1.6.1.5 Write Entire Virtual Digital Input Configuration - Reply OK

If the entire configuration of the "Virtual Digital Inputs" is written correctly, the re-
sponse is composed as follows:
DATA TYPE
Byte

5.1.6.1.6 Write Entire Virtual Digital Input Configuration - Reply Error

If the writing of the entire configuration of the "Virtual Digital Inputs" is rejected, the
response is the following:
42
——————
GEFRAN
FIELD VALUE
Service 14hex OR
Code 80hex
1Fhex
General
Error
<> 1Fhex
Additional
XX
For error codes see chapter 6.0.
FIELD VALUE
Service Code 02hex
Class ID 6Ahex
Instance ID 01
Virtual Digital
XXXX
Input Word 0
Virtual Digital
XXXX
Input Word xx
Virtual Digital
XXXX
Input Word 15
FIELD VALUE
Service 02hex OR
Code 80hex
General
00
Error
Additional 00
Interface Board DeviceNet
MEANING
Set _Attribute_Single Reply
code- Common Service.
Error vendor specific (see
Additional field)
DeviceNet specific error
code (see DeviceNet
Specifications).
1)
Drive specific error code.
MEANING
Set_Attribute_All -Common Service
Virtual Digital Input Configuration
Class Object
Virtual Digital Input Instance ID
Drive parameter index assigned to
2)
the Virtual Digital Input first word.
Drive parameter index assigned to
the Virtual Digital Input xx th word.
Drive parameter index assigned to
2)
the Virtual Digital Input 16th word.
MEANING
Set_Attribute_All Reply
code- Common Service.
Zero means service correctly
executed.
——————
dn4050
dn5040
dn4070