Read Virtual Digital Output Configuration; Read Single Virtual Digital Output Configuration; Read Single Virtual Digital Output Configuration - Reply Ok - gefran SBI-DN Instruction Manual

DATA TYPE
Byte
For error codes see chapter 6.0.
1)

5.2.6.2 Read Virtual Digital Output Configuration

In this example is shown the reading of the configuration of the "Virtual Digital
Outputs"; the cases of positive and wrong reading are distinguished.

5.2.6.2.1 Read Single Virtual Digital Output Configuration

The data frame for the reading of the single configuration of the "Virtual Digital
Outputs" is composed as follows:
DATA TYPE
Byte
1)
See Note
Byte
Byte or Word depending on the type of allocation executed by the Master.
1)

5.2.6.2.2 Read Single Virtual Digital Output Configuration - Reply OK

If the single configuration of the "Virtual Digital Outputs" is read correctly, the re-
sponse is composed as follows:
DATA TYPE
Byte
Word
The format of the Drive parameter index is Low Byte - High byte.
1)
——————
SBI-DN
FIELD VALUE
Service 14hex OR
Code 80hex
1Fhex
General
Error
<> 1Fhex
Additional
XX
FIELD VALUE
Service Code 0Ehex
Class ID 6Bhex
Instance ID
Attribute ID XX
FIELD VALUE
0Ehex OR
Service Code
80hex
Word 0 Virtual
XXXX
Digital Output
Interface Board DeviceNet
MEANING
Set _Attribute_Single Reply
code- Common Service.
Error vendor specific (see
Additional field)
DeviceNet specific error
code (see DeviceNet
Specifications).
1)
Drive specific error code.
MEANING
Get_Attribute_Single - Common
Service
Virtual Digit I/O Configuration
Class Object
Virtual Digit Output Instance
01
ID
Virtual Digit Output XX word
involved in the configuration
MEANING
Get_Attribute_Single Reply code-
Common Service
Drive parameter index assigned to
1)
the Virtual Digital Output XX word
——————
dn4050
dn5140
dn5150
49