Write Entire Polling M->S Configuration - Reply Error; Read M->S Polling Configuration; Read Single Polling M->S Configuration; Read Single Polling M->S Configuration - Reply Ok - gefran SBI-DN Instruction Manual

composed as follows:
DATA TYPE
Byte
4.2.6.1.6 Write Entire Polling M->S Configuration - Reply Error
If the writing of the entire configuration of the Polling M->S is rejected, the response
is the following:
DATA TYPE
Byte
For error codes see chapter 6.0.
1)
4.2.6.2 Read M->S Polling Configuration
In this example is shown the writing of the configuration of the Polling M->S; the
cases of positive and wrong reading are distinguished.
4.2.6.2.1 Read Single Polling M->S Configuration
The data frame for the reading of the single configuration of the Polling M->S is
composed as follows:
DATA TYPE
Byte
See Note
Byte
Byte or Word depending on the type of allocation executed by the Master.
1)
4.2.6.2.2 Read Single Polling M->S Configuration - Reply OK
If the single configuration of the Polling M->S is read correctly, the response is
composed as follows:
36
——————
GEFRAN
FIELD VALUE
Service 02hex OR
Code 80hex
General
00
Error
Additional 00
FIELD VALUE
Service
14hex OR 80hex
Code
1Fhex
General
Error
<> 1Fhex
1)
Additional
XX
FIELD VALUE
Service Code 0Ehex
Class ID 69hex
1)
Instance ID
Attribute ID XX
Interface Board DeviceNet
MEANING
Set_Attribute_All Reply
code- Common Service.
Zero means service correctly
executed.
MEANING
Set _Attribute_ All Reply code-
Common Service
Error vendor specific (see
Additional field)
DeviceNet specific error code
(see DeviceNet Specifications)
Drive specific error code.
MEANING
Get_Attribute_Single -
Common Service
Polling M ->S Configuration
Class Object
01 Polling M ->S Instance ID
Polling M ->S word involved
in configuration
——————
dn4070
dn4080
dn4190