Table of Contents
Advertisement
7.8 EDIT
The Editing phase is activated by pressing the Enter key when positioned on an
item that can be set; during this phase, the functions of the keys are as follows:
1)
The Right/Left arrow keys are used to move along the number being specified;
the number of permitted digits depends on the type of data item being operated
on.
2)
The "+" and "-" keys are used to increment/decrement the value of the selected
digit; permitted values are in the range 0 to 9.
3)
Enter key confirms the setting.
4)
Cancel key cancels the setting operation.
During Editing, the digit being set will flash.
E
SBI DeviceNet
OFFSET
CANC
The above figure shows an example of editing a value and the effect of keys during
this phase.
68
——————
GEFRAN
E
Par. index Offset
0
Interface Board DeviceNet
+
0 ... 9
-
9 ... 0
ok
Enter Offset
Return without changes
0 0 0 0
CANC
——————
E
Advertisement
Table of Contents
