Read Entire Polling S->M Configuration - Reply Error; Object Configuration Polling Parameters M->S - gefran SBI-DN Instruction Manual

DATA TYPE
Byte
Word
The format of the Drive parameter index is Low Byte - High byte.
1)
4.1.6.2.6 Read Entire Polling S->M Configuration - Reply Error
If the reading of the entire configuration of the Polling S->M is rejected, the response
is the following:
DATA TYPE
Byte
1)
4.2 OBJECT CONFIGURATION POLLING PARAMETERS M->S
For assigning the Drive parameters to the 4 Words of Polling from Master to Slave,
the new object "POLL M->S CFG" with identificator of a specific class is used.
The object is composed as follows:
Class Attribute:
Instance Attribute:
· ID = 1: Drive parameter assigned to the first Word of Polling M->S.
· ID = 2: Drive parameter assigned to the second Word of Polling M->S.
· ID = 3: Drive parameter assigned to the third Word of PollingM->S.
· ID = 4: Drive parameter assigned to the fourth Word of Polling M->S.
32
——————
GEFRAN
FIELD VALUE
01hex OR
Service Code
80hex
Word 0 Polling
S->M
Word xx
XXXX
Polling S->M
Word 4 Polling
S->M
FIELD VALUE
Service 14hex OR
Code 80hex
1Fhex
General
Error
<> 1Fhex
1)
Additional
XX
For error codes see chapter 6.0.
Class ID: 69h.
Revision
Interface Board DeviceNet
MEANING
Get_Attribute_All -Common
Service.
Drive parameter index assigned
to the Polling S->M first word.
Drive parameter index assigned
1)
to the Polling S->M xx th word.
Drive parameter index assigned
to the Polling S->M 4th word.
MEANING
Get _Attribute_All Reply code-
Common Service.
Error vendor specific (see
Additional field)
DeviceNet specific error code
(see DeviceNet Specifications).
Drive specific error code.
——————
dn4120
dn4130