Read Single Polling M->S Configuration - Reply Error; Interface Board Devicenet; Read Entire Polling M->S Configuration; Read Entire Polling M->S Configuration - Reply Ok - gefran SBI-DN Instruction Manual

DATA TYPE
Byte
Word
The format of the Drive parameter index is Low Byte - High byte.
1)
4.2.6.2.3 Read Single Polling M->S Configuration - Reply Error
If the reading of the single configuration of the Polling M->S is rejected, the re-
sponse is the following:
DATA TYPE
Byte
For error codes see chapter 6.0.
1)
4.2.6.2.4 Read Entire Polling M->S Configuration
The data frame for the reading of the total configuration of the Polling M->S is
composed as follows:
DATA TYPE
Byte
1)
See Note
Byte or Word depending on the type of allocation executed by the Master.
1)
4.2.6.2.5 Read Entire Polling M->S Configuration - Reply OK
If the entire configuration of the Polling M->S is read correctly, the response is
composed as follows:
——————
SBI-DN
FIELD VALUE
0Ehex OR
Service Code
80hex
Word XX
XXXX
Polling M->S
FIELD VALUE
Service 14hex OR
Code 80hex
1Fhex
General
Error
<> 1Fhex
1)
Additional
XX
FIELD VALUE
Service Code 01hex
Class ID 69hex
Instance ID 01

Interface Board DeviceNet

MEANING
Get_Attribute_Single Reply
code- Common Service.
Drive parameter index assigned
1)
to the Polling M->S XX word.
MEANING
Get _Attribute_Single Reply
code- Common Service.
Error vendor specific (see
Additional field)
DeviceNet specific error
code (see DeviceNet
Specifications).
Drive specific error code.
MEANING
Get_Attribute_All -Common
Service.
Polling M->S Configuration
Class Object.
Polling M->S Instance ID.
——————
dn4200
dn4105
dn4210
37