Write Entire Virtual Digital Output Configuration; Write Entire Virtual Digital Output Configuration - Reply Ok; Write Entire Virtual Digital Output Configuration - Reply Error - gefran SBI-DN Instruction Manual

DATA TYPE
Byte
For error codes see chapter 6.0.
1)

5.2.6.1.4 Write Entire Virtual Digital Output Configuration

The data frame for the writing of the entire configuration of the "Virtual Digital
Outputs" is composed as follows:
DATA TYPE
Byte
1)
See Note
Virtual Digital
Output Word 0
Virtual Digital
Word
Output Word xx
Virtual Digital
Output Word 15
Byte or Words depending on the type of allocation executed by the Master.
1)
The format of the Drive parameter index is Low Byte - High byte.
2)

5.2.6.1.5 Write Entire Virtual Digital Output Configuration - Reply OK

If the entire configuration of the "Virtual Digital Outputs" is written correctly, the
response is composed as follows:
DATA TYPE
Byte

5.2.6.1.6 Write Entire Virtual Digital Output Configuration - Reply Error

If the writing of the entire configuration of the "Virtual Digital Outputs" is rejected,
the response is the following:
48
——————
GEFRAN
FIELD VALUE
Service 14hex OR
Code 80hex
1Fhex
General
Error
<> 1Fhex
Additional
XX
FIELD VALUE
Service Code 02hex
Class ID 6Bhex
Instance ID 01
XXXX
FIELD VALUE
Service 02hex OR
Code 80hex
General
00
Error
Additional 00
Interface Board DeviceNet
MEANING
Set _Attribute_Single Reply
code- Common Service.
Error vendor specific (see
Additional field)
DeviceNet specific error
code (see DeviceNet
Specifications).
1)
Drive specific error code.
MEANING
Set_Attribute_All -Common Service
Virtual Digital Output Configuration
Class Object
Virtual Digital Output Instance ID
Drive parameter index assigned to the
Virtual Digital Output first word.
Drive parameter index assigned to the
2)
Virtual Digital Output xx th word.
Drive parameter index assigned to the
Virtual Digital Output 16th word.
MEANING
Set_Attribute_All Reply
code- Common Service.
Zero means service correctly
executed.
——————
dn4050
dn5130
dn4070