Instance Attributes; Common Services; Object Specific Services; Behavior - gefran SBI-DN Instruction Manual

5.2.3 Instance Attributes

Need in
Number
implementation
1
Required
X
16

5.2.4 Common Services

Need in
Service
implementation
Code
Class Instance
01
hex
02
hex
n/a Required
0E
hex
10
hex

5.2.5 Object Specific services

This object has no specific services.

5.2.6 Behavior

This object allows to assign Drive parameters to the "Virtual Digital Outputs" so that
the Master can read cyclically the parameter values. The assignment of the Drive
parameters is accomplished through the index of the parameter; if the parameter
for any reason cannot be assigned to a "Virtual Digital Output", an error code will
be returned.
46
——————
GEFRAN
DeviceNet
Access Rule Name
Data Type
DGT
Set Out
Conf.
Service Name
Get_Attribute_All
Set_Attribute_All
Get_Attribute_Single
Set_Attribute_Single
Interface Board DeviceNet
Description of Attribute
Drive parameter assigned to
the first Virtual Digital
Output
Drive parameter assigned to
UINT the Xth Virtual Digital
Output
Drive parameter assigned to
the 16th Virtual Digital
Output
Description of Service
Reads the indexes of the drive
parameter assigned to the
Virtual Digital Output
Writes the indexes of the
drive parameter assigned to
the Virtual Digital Output
Reads a single index of the
drive parameter assigned to
the Virtual Digital Output
Writes a single index of the
drive parameter assigned to
the Virtual Digital Output
——————
dn5100
dn5110