Read Entire Virtual Digital Input Configuration - Reply Error; Configuration Object Virtual Digital Output; Class Code; Class Attributes - gefran SBI-DN Instruction Manual

5.1.6.2.6 Read Entire Virtual Digital Input Configuration - Reply Error

If the reading of the entire configuration of the "Virtual Digital Inputs" is rejected,
the response is the following:
DATA TYPE
Byte
For error codes see chapter 6.0.
1)

5.2 CONFIGURATION OBJECT VIRTUAL DIGITAL OUTPUT

For the assignment of Drive parameters to the 16 Words of the Virtual Digital Outputs
a new object with a specific identifier class is used.
The object is made as follows:
Class Attribute:
Instance Attribute:
· ID = 1: Word for configuration first Output (direction Master ->Slave).
· ID = 2: Word for configuration second Output (direction Master->Slave).
· ID = x: Word for configuration Outputs (direction Master->Slave).
· ID = 16; Word for configuration sixteenth Output (direction Master->Slave).

5.2.1 Class code

5.2.2 Class attributes

Need in
Number
implementation
1 Optional
——————
SBI-DN
FIELD VALUE
Service 14hex OR
Code 80hex
1Fhex
General
Error
<> 1Fhex
1)
Additional
XX
Class Code: 6Bhex
Access Rule Name
Get Revision
Interface Board DeviceNet
MEANING
Get _Attribute_All Reply code-
Common Service.
Error vendor specific (see
Additional field)
DeviceNet specific error code
(see DeviceNet Specifications).
Drive specific error code.
Class ID: 6Bh.
Revision
DeviceNet Description
Data Type of Attribute
Revision of
UINT
this object
——————
dn4130
Semantics of
values
dn345
45