Edit Offset; Polling Menu - gefran SBI-DN Instruction Manual

menus:
- POLL S->M.
- POLL M->S.
- Digital Input.
- Digital Output.
The Offset value consists of five digits.
Pressing the Enter key will result in the "Enter Offset" message being displayed on
the first row; the value is entered on the second row.

7.2.1 Edit Offset

The flowchart illustrating Offset Editing is shown below. Note that pressing Cancel
at any time returns to the previous Menu or cancels the operation in course. Refer
to chapter 7.8 for Editing..
Enter pressed
no
The Default Offset value is 0 (zero). The entered value is not stored in non-volatile
memory and therefore only remains active until such time as power is removed; the
Offset is however maintained active when the SBI main menu is exited.
Refer to section 7.6.1. for messages regarding Password entry.

7.3 POLLING MENU

The structure of the POLL Menus is the following:
——————
SBI-DN
Password enabled
or active ?
yes
Enter password
no
Password OK ?
yes
Enter Offset
Exit
Interface Board DeviceNet
Warning
——————
Exit
55