Xilinx LogiCORE Getting Started Manual page 26

R
Chapter 4: Detailed Example Design
wave_mti.do
A ModelSim macro file that opens a wave window and adds signals of interest to it. It is
called by the simulate_mti.do macro file.
simulate_ncsim.sh
An IUS script file that compiles the VHDL sources and then runs the functional simulation
to completion.
wave_ncsim.sv
An IUS macro file that opens a wave window and adds signals of interest to it. It is called
by the simulate_ncsim.sh script file.
<project_dir>/<component_name>/simulation/timing
Note:
This directory is only present with the Full license.
simulate_mti.do
A ModelSim macro file that compiles the VHDL sources and then runs the timing
simulation to completion.
wave_mti.do
A ModelSim macro file that opens a wave window and adds signals of interest to it. It is
called by the simulate_mti.do macro file.
simulate_ncsim.sh
An IUS script file that compiles the VHDL sources and then runs the timing simulation to
completion.
wave_ncsim.sv
An IUS macro file that opens a wave window and adds signals of interest to it. It is called
by the simulate_ncsim.sh script file.
26 www.xilinx.com Ethernet 1000BASE-X PCS/PMA or SGMII v7.0
UG145 January 18, 2006