Adtech ADT-DK300A Manufacturer's Manual page 144

Range
Unit
Authority
Default
Effective time
Note
Transduser DetectPort
080
Range
Unit
Authority
Default
Effective time
Note
ExScram2 DetectPort
081
Range
Unit
Authority
Default
Effective time
Note
Air of ToolCheck OutPort
082
Range
Unit
Authority
Default
Effective time
Note
083 IO Conf in RESET 00~15
Range
Unit
Authority
Default
Effective time
Note
135
BZ001M056A ADT‐DK300A/400A Engraving Machine
: 0~23
: None
: Operation admin or higher
: =========
: Instant
: Used for input detection port configuration of spindle alarm signal; the
default value is null; used together with parameter 069~072
: 0~23
: None
: Operation admin or higher
: =========
: Instant
: Used for input detection port configuration of inverter alarm signal; the
default value is null.
: 0~23
: None
: Operation admin or higher
: =========
: Instant
: Used for port configuration of external emergency stop input signal; the
default value is null.
: 0~23
: None
: Operation admin or higher
: =========
: Instant
: Used for output port configuration of tool setter blowing; before tool
setting, blow the debris to ensure the tool setting accuracy; the default
value is null.
: 0~65535
: None
: Operation admin or higher
: =========
: Instant
: Used to configure the output signal that should be reset. For example, to
reset output port of pin 10# when the system is reset or alarms, press
EOB and set OUT9 in the pop‐up dialog box (black dot is selected), press
and hold EOB for three seconds to exit.