Adtech ADT-DK300A Manufacturer's Manual page 103

BZ001M056A ADT‐DK300A/400A Engraving Machine
058 Interpolation speed mode
Range
Unit
Authority
Default
Effective time
Note
059 GCode pre‐treatment
Range
Unit
Authority
Default
Effective time
Note
060 'O'Pro Scan
Range
Unit
Authority
Default
Effective time
Note
061 SpindleControlMode
Range
Unit
: 0~1
: None
: Operation admin or higher
: 0
: Instant
: In pretreatment mode, set to 0 to use corner speed balancing algorithm,
or set to 1 to use axis acceleration constraints balancing algorithm
: 0~1
: None
: Operation admin or higher
: 0 (real‐time processing)
: Instant
: Real‐time processing is suitable for machine test.
In pretreatment mode, the system enters processing state buffs for two
seconds and pre‐reads. The pretreatment mode only can check the
direction and size of feeding segment to adjust the speed automatically
and process at optimized speed.
: 0~1
: None
: Operation admin or higher
: 1
: Instant
: File scanning symbol will quicken the file transfer speed when
processing large files.
When transferring NC files, the system needs to scan over to position
every program block. In this way, if the file only has one block and the
file size is very big, it will cause unnecessary waiting time. If this option
is closed, the system will exit after scanning the address of first block.
: 0~1
: None
94