Adtech ADT-DK300A Manufacturer's Manual page 30

BZ001M056A ADT‐DK300A/400A Engraving Machine
Caution
The value entry dialog box has two input methods, i.e. direct assignment and increment
assignment. For direct assignment, the entered value is assigned to specified parameter directly;
for increment assignment, the entered value is added to specified parameter and then assigned
to the parameter;
The increment input box and direct input box have a prompt symbol in the left respectively, '='
indicates direct input, '+' indicates increment input, and the default mode is direct assignment.
To change to increment assignment, press the "UP/DOWN" key
The increment input is shown above, 1# compensation is ‐11.2, to add ‐0.4, the operation
follows: select 1# compensation, enter ‐0.4, and then press / to select the
mode, "+" is to add the new value to original value, and "=" is to replace with the new value
directly. Then, press to finish the modification of the compensation, as shown below.
21