3.7.2. System parameter setting
The system parameters can be modified as follow:
Press
to select the edit mode;
In the main menu, press [
Then, press the submenu key to select the parameter type (comprehensive, management ...);
Press
,
[
] to modify the parameter where the cursor locates.
3.8 Fast system operation
The value entry dialog box has two input methods, i.e. direct assignment and increment assignment. For
direct assignment, the entered value is assigned to specified parameter directly; for increment
assignment, the entered value is added to specified parameter and then assigned to the parameter; the
increment input box and direct input box have a prompt symbol in the left respectively, '=' indicates
direct input, '+' indicates increment input, and the default mode is direct assignment. To change to
increment assignment, press the "
BZ001M056A ADT‐DK300A/400A Engraving Machine
] to enter parameter setting interface;
,
,
to move cursor to select the parameter, enter the value and then press
/
" key.
22