Motor Control File (File B) - Allen-Bradley PowerFlex 70 User Manual

No. Parameter Name and Description
026 [Rated kW]
32
Drive power rating.
027 [Rated Volts]
The drive input voltage class (208, 240,
400 etc.).
028 [Rated Amps]
The drive rated output current.
029 [Control SW Ver]
Main Control Board software version.

Motor Control File (File B)

No. Parameter Name and Description
040 [Motor Type]
Set to match the type of motor connected.
041 [Motor NP Volts]
Set to the motor nameplate rated volts.
042 [Motor NP FLA]
Set to the motor nameplate rated full load
amps.
043 [Motor NP Hertz]
Set to the motor nameplate rated
frequency.
044 [Motor NP RPM]
Set to the motor nameplate rated RPM.
045 [Motor NP Power]
Set to the motor nameplate rated power.
32
046 [Mtr NP Pwr Units]
The power units shown on the motor
nameplate.
Programming and Parameters
Values
Default: Read Only
Min/Max: 0.37/15.0 kW
Display: 0.1 kW
Default: Read Only
Min/Max: Based on Drive Rating
Display: 0.1 VAC
Default: Read Only
Min/Max: 1.1/32.2 Amps
Display: 0.1 Amps
Default: Read Only
Min/Max: 0.000/65.256
Display: 0.001
Values
Default: 0 "Induction"
Options: 0 "Induction"
1 "Synchr Reluc"
2 "Synchr PM"
Default: Based on Drive Rating
Min/Max: 0.0/[Rated Volts]
Display: 0.1 VAC
Default: Based on Drive Rating
0.0/[Rated Amps] × 2
Min/Max:
Display: 0.1 Amps
Default: Based on Drive Cat. No.
Min/Max: 5.0/400.0 Hz
Display: 0.1 Hz
Default: 1750 RPM
Min/Max: 60/24000 RPM
Display: 1 RPM
Default: Based on Drive Rating
Min/Max: 0.0/100.0
Display: See [Mtr NP Pwr Units]
Default: Based on Drive
Rating
Options: 0 "Horsepower"
1 "kiloWatts"
3-9
196
047
048
046