Allen-Bradley PowerFlex 70 User Manual page 50

3-14 Programming and Parameters
No. Parameter Name and Description
095 [Speed Ref B Lo]
Scales the lower value of the [Speed Ref
B Sel] selection when the source is an
analog input.
096 [TB Man Ref Sel]
Sets the manual speed reference source
when a digital input is configured for
"Auto/Manual."
(1)
"Analog In 2" is not a valid selection if it
was selected for any of the following:
- [Trim In Select]
- [PI Feedback Sel]
- [PI Reference Sel]
- [Current Lmt Sel]
097 [TB Man Ref Hi]
Scales the upper value of the [TB Man
Ref Sel] selection when the source is an
analog input.
098 [TB Man Ref Lo]
Scales the lower value of the [TB Man Ref
Sel] selection when the source is an
analog input.
100 [Jog Speed]
Sets the output frequency when a jog
command is issued.
101 [Preset Speed 1]
102 [Preset Speed 2]
103 [Preset Speed 3]
104 [Preset Speed 4]
105 [Preset Speed 5]
106 [Preset Speed 6]
107 [Preset Speed 7]
Provides an internal fixed speed
command value. In bipolar mode direction
is commanded by the sign of the
reference.
117 [Trim In Select]
Specifies which analog input signal is
being used as a trim input.
118 [Trim Out Select]
Specifies which speed references are to be trimmed.
Factory Default Bit Values
x x x x x x
15 14 13 12 11 10
Nibble 4 Nibble 3
Bit #
Values
Default:
Min/Max:
Display:
Default:
Options:
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Default:
Options:
x x x x x x x x
9 8 7 6 5 4 3 2
Nibble 2 Nibble 1
0.0 Hz
–/+[Maximum Speed]
0.1 Hz
1 "Analog In 1"
1 "Analog In 1"
(1)
2 "Analog In 2"
3-8 "Reserved"
9 "MOP Level"
[Maximum Speed]
–/+[Maximum Speed]
0.1 Hz
0.0 Hz
–/+[Maximum Speed]
0.1 Hz
10.0 Hz
–/+[Maximum Speed]
0.1 Hz
5.0 Hz
10.0 Hz
20.0 Hz
30.0 Hz
40.0 Hz
50.0 Hz
60.0 Hz
–/+[Maximum Speed]
0.1 Hz
2 "Analog In 2"
See [Speed Ref A
Sel]
0 0 1 =Trimmed
0 =Not Trimmed
1 0
x =Reserved
090
093
097
098
096
096
090
093
090
093
117
119
120