Allen-Bradley PowerFlex 70 User Manual page 98

B-6 HIM Overview
LED HIM
Step
1. Press Esc until the Output Frequency
screen appears. This screen displays the
frequency of the drive if it is running. If the
drive is stopped, it will display 0.
2. Press Enter. The parameter that was last
viewed appears. Its file letter will flash.
3. Press the Up Arrow or Down Arrow to scroll
through the files.
4. Press Enter to enter a file. The right digit will
then flash.
5. Press the Up Arrow or Down Arrow to scroll
through the parameters that are in the file.
An "n" appears after a number if a
parameter is a bit parameter that is divided
into nibbles.
6. Press Enter to view the value of a
parameter or nibble. Its value will be
displayed. If you do not want to edit the
value, press Esc to return to the parameter
list.
7. Press Enter to enter edit mode. The right
digit will flash if it can be edited.
8. Press the Up Arrow or Down Arrow to
change the value. If desired, press Sel to
move from digit to digit or bit to bit. The digit
or bit that you can change will flash.
To change a sign in a signed value, press
Sel to move the cursor to the left-most digit.
Then, press the Up Arrow or Down Arrow to
scroll to the desired sign.
9. Press Enter to save the value. If you want to
cancel a change, press Esc. The value will
stop flashing to indicate that you are no
longer in edit mode.
10. Press Esc to return to the parameter list.
Key(s) Example Displays
Esc
or
or
or
Sel
Esc