Allen-Bradley PowerFlex 70 User Manual page 58

3-22 Programming and Parameters
No. Parameter Name and Description
196 [Param Access Lvl]
Selects the parameter display level.
Basic = Reduced param. set
Advanced = Full param. set
197 [Reset To Defalts]
Resets all parameter values to defaults.
Option 1 resets drive to factory settings.
Options 2 and 3 will reset drive to
alternate voltage and current rating.
198 [Load Frm Usr Set]
Loads a previously saved set of
parameter values from a selected user set
location in drive nonvolatile memory to
active drive memory.
199 [Save To User Set]
Saves the parameter values in active
drive memory to a user set in drive
nonvolatile memory.
200 [Reset Meters]
Resets selected meters to zero.
201 [Language]
Selects the display language when using
an LCD HIM. This parameter is not
functional with an LED HIM.
202 [Voltage Class]
Configures the drive current rating and
associates it with the selected voltage
(i.e. 400 or 480V). This parameter is
normally used when downloading
parameter sets.
203 [Drive Checksum]
Provides a checksum value that indicates
whether or not a change in drive
programming has occurred.
Values
Default: 0 "Basic"
Options: 0 "Basic"
1 "Advanced"
Default: 0 "Ready"
Options: 0 "Ready"
1 "Factory"
2 "Low Voltage"
3 "High Voltage"
Default: 0 "Ready"
Options: 0 "Ready"
1 "User Set 1"
2 "User Set 2"
3 "User Set 3"
Default: 0 "Ready"
Options: 0 "Ready"
1 "User Set 1"
2 "User Set 2"
3 "User Set 3"
Default: 0 "Ready"
Options: 0 "Ready"
1 "MWh"
2 "Elapsed Time"
Default: 0 "Not Selected"
Options: 0 "Not Selected"
1 "English"
2 "Français"
3 "Español"
4 "Italiano"
5 "Deutsch"
6 "Reserved"
7 "Português"
8-9 "Reserved"
10 "Nederlands"
Default: Based on Drive Cat.
No.
Options: 2 "Low Voltage"
3 "High Voltage"
Default: Read Only
Min/Max: 0/65535
Display: 1
199
198