Allen-Bradley PowerFlex 70 User Manual page 49

No. Parameter Name and Description
084 [Skip Frequency 1]
085 [Skip Frequency 2]
086 [Skip Frequency 3]
Sets a frequency at which the drive will
not operate.
[Skip Frequency 1-3] and [Skip Frequency
Band] must not equal 0.
087 [Skip Freq Band]
Determines the bandwidth around a skip
frequency. The [Skip Freq Band] is split
applying 1/2 above and 1/2 below the
actual Skip Frequency. The same
bandwidth applies to all Skip Frequencies.
090 [Speed Ref A Sel]
Selects the source of the speed reference
to the drive unless [Speed Ref B Sel] or
[Preset Speed 1-7] is selected.
For more information on selecting a speed
reference source, see
page 1-15.
(1)
See Appendix B
091 [Speed Ref A Hi]
Scales the upper value of the [Speed Ref
A Sel] selection when the source is an
analog input.
092 [Speed Ref A Lo]
Scales the lower value of the [Speed Ref
A Sel] selection when the source is an
analog input.
093 [Speed Ref B Sel]
See [Speed Ref A Sel].
094 [Speed Ref B Hi]
Scales the upper value of the [Speed Ref
B Sel] selection when the source is an
analog input.
Programming and Parameters
Values
Default:
Default:
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Default:
Options:
Figure 1.6 on
for DPI port locations.
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Default:
Options:
Default:
Min/Max:
Display:
0.0 Hz
0.0 Hz
0.0 Hz
–/+[Maximum Speed]
0.1 Hz
0.0 Hz
0.0/30.0 Hz
0.1 Hz
2 "Analog In 2"
1 "Analog In 1"
2 "Analog In 2"
3-8 "Reserved"
9 "MOP Level"
10 "Reserved"
11 "Preset Spd1"
12 "Preset Spd2"
13 "Preset Spd3"
14 "Preset Spd4"
15 "Preset Spd5"
16 "Preset Spd6"
17 "Preset Spd7"
(1)
18 "DPI Port 1"
(1)
19 "DPI Port 2"
(1)
20 "DPI Port 3"
21 "Reserved"
(1)
22 "DPI Port 5"
[Maximum Speed]
–/+[Maximum Speed]
0.1 Hz
0.0 Hz
–/+[Maximum Speed]
0.1 Hz
11 "Preset Spd1"
See [Speed Ref A
Sel]
[Maximum Speed]
–/+[Maximum Speed]
0.1 Hz
3-13
087
084
085
086
002
091
thru
093
101
thru
107
117
thru
120
192
thru
194
213
272
273
320
361
thru
366
082
081
See
090
093