Allen-Bradley PowerFlex 70 User Manual page 23

Signal and Control Wire Types
Table 1.C Recommended Signal Wire
Signal
Type Wire Type(s)
Analog I/O Belden 8760/9460(or equiv.)
Belden 8770(or equiv.)
EMC Refer to EMC Instructions on page 1-19
Compliance
(1)
If the wires are short and contained within a cabinet which has no sensitive circuits, the use of
shielded wire may not be necessary, but is always recommended.
Table 1.D Recommended Control Wire for Digital I/O
Wire Type(s)
Unshielded Per US NEC or applicable national
or local code
Shield Multi-conductor shielded cable
such as Belden 8770(or equiv.)
Installation/Wiring
Description
2
0.750 mm (18AWG), twisted
pair, 100% shield with drain
2
0.750 mm (18AWG), 3
conductor, shielded for remote
pot only.
for details
Description
—
100% shield coverage copper,
color coded and jacketed
1-11
Minimum
Insulation Rating
300V,
(1)
. 60 degrees C
(140 degrees F)
Minimum
Insulation Rating
300V, 60 degrees C
(140 degrees F)