Allen-Bradley PowerFlex 70 User Manual page 61

No. Parameter Name and Description
215 [Last Stop Source]
Displays the source that initiated the most
recent stop sequence. It will be cleared
(set to 0) during the next start sequence.
216 [Dig In Status]
Status of the digital inputs.
x x x x
15 14 13 12
Nibble 4
Bit #
217 [Dig Out Status]
Status of the digital outputs.
x x x x
15 14 13 12 11
Nibble 4
Bit #
218 [Drive Temp]
Present operating temperature of the
drive power section.
219 [Drive OL Count]
Accumulated percentage of drive
overload. Continuously operating the
drive over 100% of its rating will increase
this value to 100% and cause a drive fault.
220 [Motor OL Count]
Accumulated percentage of motor
overload. Continuously operating the
motor over 100% of the motor overload
setting will increase this value to 100%
and cause a drive fault.
Programming and Parameters
Values
Default:
Options:
x x x x x x 0 0
11 10 9 8 7 6 5 4
Nibble 3 Nibble 2
x x x x x x x x x
10 9 8 7 6 5 4 3
Nibble 3 Nibble 2
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
Read Only
0 "Pwr Removed"
1 "DPI Port 1"
2 "DPI Port 2"
3 "DPI Port 3"
4 "Reserved"
5 "DPI Port 5"
6 "Reserved"
7 "Digital In"
8 "Fault"
9 "Not Enabled"
10 "Sleep"
11 "Jog"
Read Only
0 0 0 0 1 =Input Present
0 =Input Not Present
3 2 1 0
x =Reserved
Nibble 1
Read Only
x 0 0 1 =Output Energized
0 =Output De-energized
2 1 0
x =Reserved
Nibble 1
Read Only
0.0/100.0%
0.1%
Read Only
0.0/100.0%
0.1%
Read Only
0.0/100.0%
0.1%
3-25
361
362
363
364
365
366
361
thru
366
380
thru
384
150
047
048