Communication File (File H) - Allen-Bradley PowerFlex 70 User Manual

Communication File (File H)

No. Parameter Name and Description
270 [DPI Data Rate]
Sets the baud rate for attached drive
peripherals. When changing this value the
drive must be reset for the change to take
affect.
271 [Drive Logic Rslt]
The final logic command resulting from the
combination of all DPI and discrete inputs. This
parameter has the same structure as the
product-specific logic command received via DPI and
is used in peer to peer communications.
0 0 0 0
15 14 13 12
Nibble 4
Bit #
(1)
Bits
14 13 12 Description
0 0 0 No Command - Man. Mode
0 0 1 Ref A Auto
0 1 0 Ref B Auto
0 1 1 Preset 3 Auto
1 0 0 Preset 4 Auto
1 0 1 Preset 5 Auto
1 1 0 Preset 6 Auto
1 1 1 Preset 7 Auto
272 [Drive Ref Rslt]
Present frequency reference scaled as a
DPI reference for peer to peer
communications. The value shown is the
value prior to the accel/decel ramp and
any corrections supplied by slip comp, PI,
etc.
273 [Drive Ramp Rslt]
Present frequency reference scaled as a
DPI reference for peer to peer
communications. The value shown is the
value after the accel/decel ramp but prior
to any corrections supplied by slip comp,
PI, etc.
Programming and Parameters
Values
Default:
Options:
1 1 1 0 1 0 0 0 1
11 10 9 8 7 6 5 4 3
Nibble 3 Nibble 2
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
0 "125 kbps"
0 "125 kbps"
1 "500 kbps"
Read Only
1 0 0 1 =Condition True
0 =Condition False
2 1 0
x =Reserved
Nibble 1
Read Only
0-32767
1
Read Only
0-32767
1
3-29