Monitor File (File A) - Allen-Bradley PowerFlex 70 User Manual

3-8 Programming and Parameters

Monitor File (File A)

No. Parameter Name and Description
001 [Output Freq]
Output frequency present at T1, T2 & T3
(U, V & W)
002 [Commanded Freq]
Value of the active frequency command.
003 [Output Current]
The total output current present at T1, T2
& T3 (U, V & W).
004 [Torque Current]
The amount of current that is in phase
with the fundamental voltage component.
005 [Flux Current]
The amount of current that is out of phase
with the fundamental voltage component.
006 [Output Voltage]
Output voltage present at terminals T1, T2
& T3 (U, V & W).
007 [Output Power]
Output power present at T1, T2 & T3 (U, V
& W).
008 [Output Powr Fctr]
Output power factor.
009 [Elapsed MWh]
32 Accumulated output energy of the drive.
010 [Elapsed Run Time]
32 Accumulated time drive is outputting
power.
011 [MOP Frequency]
Value of the signal at MOP (Motor
Operated Potentiometer).
012 [DC Bus Voltage]
Present DC bus voltage level.
013 [DC Bus Memory]
6 minute average of DC bus voltage level.
016 [Analog In1 Value]
[Analog In2 Value]
017
Value of the signal at the analog inputs.
Values
Default: Read Only
Min/Max: –/+[Maximum Freq]
Display: 0.1 Hz
Default: Read Only
Min/Max: –/+[Maximum Speed]
Display: 0.1 Hz
Default: Read Only
0.0/Drive Rated Amps × 2
Min/Max:
Display: 0.1 Amps
Default: Read Only
Drive Rating × –2/+2
Min/Max:
Display: 0.1 Amps
Default: Read Only
Drive Rating × –2/+2
Min/Max:
Display: 0.1 Amps
Default: Read Only
Min/Max: 0.0/Drive Rated Volts
Display: 0.1 VAC
Default: Read Only
0.0/Drive Rated kW × 2
Min/Max:
Display: 0.1 kW
Default: Read Only
Min/Max: 0.0/1.0
Display: 0.1
Default: Read Only
Min/Max: 0.0/429,496,729.5 MWh
Display: 0.1 MWh
Default: Read Only
Min/Max: 0.0/429,496,729.5 Hrs
Display: 0.1 Hrs
Default: Read Only
Min/Max: –/+[Maximum Frequency]
Display: 0.1 Hz
Default: Read Only
Min/Max: Based on Drive Rating
Display: 0.1 VDC
Default: Read Only
Min/Max: Based on Drive Rating
Display: 0.1 VDC
Default: Read Only
Min/Max: 0.000/20.000 mA
–/+10.000V
Display: 0.001 mA or 0.001 Volt