Allen-Bradley PowerFlex 70 User Manual page 63

No. Parameter Name and Description
230 [Alarm 2 @ Fault]
Captures and displays [Drive Alarm 2] at the time of
the last fault.
x x x x
15 14 13 12
Nibble 4
Bit #
234 [Testpoint 1 Sel]
[Testpoint 2 Sel]
236
Selects the function whose value is
displayed value in [Testpoint x Data].
These are internal values that are not
accessible through parameters.
See Testpoint Codes and Functions on
page 4-10 for a listing of available codes
and functions.
235 [Testpoint 1 Data]
[Testpoint 2 Data]
237
The present value of the function selected
in [Testpoint x Sel].
238 [Fault Config 1]
Enables/disables annunciation of the listed faults.
x x x
15 14 13
Nibble 4
Bit #
Factory Default Bit Values
240 [Fault Clear]
Resets a fault and clears the fault queue.
241 [Fault Clear Mode]
Enables/disables a fault reset (clear
faults) attempt from any source. This does
not apply to fault codes which are cleared
indirectly via other actions.
242 [Power Up Marker]
32 Elapsed hours since initial drive power up.
This value will rollover to 0 after the drive
has been powered on for more than the
max value shown. For relevance to most
recent power up see [Fault x Time].
Programming and Parameters
Values
x 0 0 0 0 0 0 0 0
11 10 9 8 7 6 5 4 3
Nibble 3 Nibble 2
Default:
Min/Max:
Display:
Default:
Min/Max:
Display:
x x x x x x 1 0
12 11 10 9 8 7 6 5
Nibble 3 Nibble 2
Default:
Options:
Default:
Options:
Default:
Min/Max:
Display:
Read Only
0 0 0 1 =Condition True
0 =Condition False
2 1 0
x =Reserved
Nibble 1
499
0/999
1
Read Only
0/65535
1
0 1 x 1 0 1 =Enabled
0 =Disabled
4 3 2 1 0
x =Reserved
Nibble 1
0 "Ready"
0 "Ready"
1 "Clear Faults"
2 "Clr Flt Que"
1 "Enabled"
0 "Disabled"
1 "Enabled"
Read Only
0.0000/429,496.7295 Hr
0.0001 Hrs
3-27
212
224
thru
230
244
246
248
250