Connecting Probes - TESTO 320 Instruction Manual

5.2.2.

Connecting probes

Connecting flue gas probes/gas pressure
adapters/temperature adapters
> Insert the connector plug into the flue gas socket and lock by
slightly turning it clockwise (bayonet lock).
Connecting other sensors
> Insert the connector plug of the probe into the probe socket.
Probe detection at the flue gas socket is carried out
continuously. New probes are recognised automatically.
Connect a probe to the probe socket before switching on
the measuring instrument or start sensor detection
manually after changing the probe:
detection.
There must be no more than one extension lead (0554
1201) between measuring instrument and flue gas probe.
5 First steps
→
[Options] Sensor
25