Showing the flue gas matrix
This function is only available if the measurement parameter
has been activated in the measured value display.
Call up function:
✓ The flue gas function is open.
>
[Options]
Options
>
[Options]
>
[Options]
is deleted.
>
[Options]
>
[Options]
numerical values.
>
[Options]
during a measurement) Set the system type to be able to
configure the ideal zone (green) of the flue gas matrix, using the
limits pre-configured for each system type.
>
[Options]
deleted.
>
[Options]
a measurement) Enter limits to be able to configure the ideal
zone (green) of the flue gas matrix.
>
[Options]
should be assigned to the x-axis of the display matrix (O2 or
CO2).
>
[Options]
during a measurement) Open the measured value display
menu.
3.
→
Fluegas
matrix.
→ Clipboard: data is saved to the clipboard.
→
Delete
clipboard: any data saved to the clipboard
→ Save: the measured values are saved in a record.
→
Show numeric
→
System
type: (This function is not available
→
Reset
graphic: the displayed graphical values are
→ Thresholds: (This function is not available during
→
CO + O2
or
CO +
→
Measurement
value: data is displayed as
CO2: choose which parameter
view: (This function is not available
6 Using the product
CO
45