Options:
>
[Options]
measured values per display page.
>
[Options]
selected line.
>
[Options]
>
[Options]
display to the factory settings.
6.1.2.2.
Alarm limits
Alarm limits can be set for several display parameters. An audible
alarm signal is triggered when the alarm limit is reached.
Calling up the function:
>
[
Switching alarm signals on / off, changing alarm limits:
1. Select function or parameter: [▲],
2. Set parameter: [▲],
3. Save changes: [Finished].
> Reset the enabled value to the factory setting: [Standard].
6.1.2.3.
Units
The units used for parameters in configuration menus can be set.
Call up function:
>
[
Adjustable units
Parameter
Altitude
Pressure
1. Select the line: [▲], [▼]→ [Edit].
2. Select the unit to be changed: [▲],
3. Confirm the entry: [Finished].
→
Number of
→
Blank
line: insert a blank line in front of the
→
Delete
→
Factory
→
]
Instrument Settings
[▼]
→
]
Device settings
Unit
m,
mbar,
lines: change the number of
line: delete the selected line.
setting: reset the measured value
→
→
[OK]
[▼]
and partly [◄], [►]→ [OK].
→
→
[OK]
Units
ft
hPa
[▼]
6 Using the product
→
Alarm Limits
→ [Edit].
→ [OK].
→ [OK].
[OK]
35