Saving Data To The Clipboard (Temporary Memory); Confirming An Error Message; Switching Off - TESTO 320 Instruction Manual

5 First steps
5.2.7.

Saving data to the clipboard (temporary memory)

Using the clipboard, measurement results from various
measurement types can be combined to produce a common
record, which can then be printed out (see above). Data is saved to
the clipboard via the
If there is data in the clipboard, the status bar shows the symbol
If there is data in the clipboard and the
all data in the clipboard will be printed out.
5.2.8.

Confirming an error message

If an error occurs, an error message is shown on the display.
> Confirming an error message: [OK].
Errors that have occurred but have not yet been rectified are
indicated by a warning symbol (
Error messages that have not yet been cancelled can be displayed
in the
5.2.9.

Switching off

> Press
- The pump may start and the sensors may be rinsed until the
switch-off thresholds (O2 > 20%, other measurement
parameters < 50 ppm) are reached. The maximum rinsing
period is 3 minutes.
- The measuring instrument switches off.
28
Options
Error diagnosis menu, see Instrument diagnosis, page 32.
Unsaved measured values are lost if the flue gas analyser
is switched off.
[ ].
menu and the Clipboard
Print command is triggered,
) in the header.
command.
.