Using The Product; Performing Settings; Assigning The Right Function Key; Instrument Settings - TESTO 320 Instruction Manual

6

Using the product

6.1.

Performing settings

6.1.1.

Assigning the right function key

The right function key can have a function from the
assigned to it. The menu
key and is available in many different menus. This assignment is
only valid for the currently opened menu / the opened function.
✓ A menu / function is opened in which the
displayed on the left function key.
1. Press
2. Select option: [▲], [▼].
Depending on the menu / function from which the
was opened, the following functions are available.
3. Assign the selected function to the right function key.
6.1.2.

Instrument settings

Calling up a function:
> [
see First steps, page 24
6.1.2.1.

Measurement view

The parameters/units and the display (number of measured values
shown per display page) can be set.
The settings are only valid for the currently chosen measurement
type, which is indicated by the symbol in the info field.
Total overview of selectable measurement parameters and units
(available selection depends on the set country version and
selected measurement type):
Display
FT
AT
GT
[Options] .
It is assumed that the contents of the chapter First steps
(see First steps, page 24) are known.
→
] Instrument Settings.
Measurement parameter
Flue gas temperature
Combustion air temperature
Instrument temperature
Options is accessed via the left function
6 Using the product
Options menu
Options menu is
Options menu
Press
33