E. Operation
22
E.4 Basic operating steps
Input editor
E.4.4 Printing data
Data are printed out via the function key
out is possible.
If data are to be transferred to a protocol printer via the infrared interface, the printer that
is to be used must be activated, see Printer , p. 28.
E.4.5 Saving data
Data are saved either via the function key
functions are only available if saving is possible.
See also Memory / Location , p. 23.
E.4.6 Confirming an error message
If an error occurs, an error message is shown in the display.
To confirm an error message:
Errors which have occurred and have not yet been rectified are shown by a warning
symbol (
) in the header.
Error messages which have not yet been removed can be viewed in the
menu, see Instrument diagnosis , p. 25.
1 Select the value (character):
2 Accept the value:
Options:
To switch between upper-case / lower-case let-
ters:
(not always available).
A <=> a
To delete characters:
To position the cursor in the text: Select the text
input field:
,
.
To delete characters in front of the cursor:
.
Del.
3 Repeat steps 1 and 2 as required.
4 Save the input:
OK Save input
. The function is only available if a print-
Print
or the function field
Save
.
OK
,
.
OK
.
<=
,
and position the cursor:
OK
OK Save input
Inst' diagnosis
,
,
.
.
. The