Preparation
Tilting the bed
1 Pull the handle of the locking mechanism out towards
the front.
2 Press handle down = head-up position.
Pull handle up = head-down position.
Release the handle: the bed automatically locks into the
●
selected position.
The bed can be tilted in finely graduated steps.
Maximum tilt angle:
Head-up position:
20°
Head-down position: 15°
Preferred positions:
Horizontal,
10° tilt head-up and
10° tilt head-down.
The mattress may slip at maximum tilt.
In this case do not place a sheet over the mattress.
Bed canopy
Optional
Higher side panels (230 mm) are recommended when using
the canopy.
Check that the bed canopy is closed.
●
When the bed canopy is not required:
Attach bracket to standard rail.
●
3 Hang bed canopy from bracket.
14
3
1
2