Tilting The Bed; In-Hospital Transport - Dräger Babytherm 8000 WB Instructions For Use Manual

Tilting the bed

1 Pull the handle of the locking mechanism out towards
the front.
2 Press handle down = head-up position.
Pull handle up = head-down position.
Release the handle: the bed automatically
locks into the selected position.
Maximum tilt angle:
Head-up position: 20°
Head-down position: 15°
The bed can be tilted in finely graduated steps.
Preferred positions:
Horizontal,
10° tilt head-up and
10° tilt head-down.
The mattress may slip at maximum tilt.
In this case do not place a sheet over the mattress.

In-hospital transport

If optional height adjustment is fitted, lower the unit to its
lowest position.
Swivel the swivel compartments or tray inwards.
Accessories projecting beyond either side of the unit must
be removed or folded in.
Switch off heating systems and disconnect the mains plug.
Disconnect gas supply hoses from central supply unit.
Fit optional bed canopy to protect patient from draughts.
Immediately after transport:
Plug in the mains plug and switch on the heating systems.
Instructions for Use Babytherm 8000 WB
Preparation
1
2
13