Weighing Without Zero Calibration; Shutting Down - Dräger Babytherm 8004 Instructions For Use Manual

Operation

Weighing without zero calibration

If the last zero calibration was performed no longer than
60 minutes earlier and no object has been removed from
the bed or placed on it during this time, repeated calibration
is not necessary.
1 Press » Reweigh«.
The patient must be lying on the bed.
–
The weighing process is performed.
A line of dots is displayed on the screen.
–
3 beeps are emitted.
–
Weighing is complete.
The weighing result is displayed on the screen.
–
After a few minutes, the scale display unit changes to
Standby mode.
A continuous sequence of dashes is displayed on the
–
screen.

Shutting down

Press the On/Off button. The green "On" LED will go out.
●
52
kg Lb
1