Repositioning Bed Endboard - Dräger Incubator 8000 NC Operating Instructions Manual

Repositioning Bed Endboard

Repositioning Bed Endboard
Board may be used at right or left end of bed, as
required.
Squeeze catches with thumb and index finger and
open the front door.
1
Push middle of endboard outwards until released from
its groove, and
reposition on other end of bed.
Cover mattress with clean sheet and place on bed.
Close front door. Red marks on door catches should
no longer be visible indicating that the catches are
fully engaged.
Preparation
1
D Incubator 8000 NC
23