Dräger Babytherm 8004 Instructions For Use Manual page 41

Switching on
1 Press button. The yellow LED in the button will start to
flash.
2 The following message appears in the text display:
»Phototherapy: Use eye protection
Press OK button to start
3 Press OK button = phototherapy lights switched on.
2 The following message appears in the text display for
5 seconds:
»Duration of phototherapy
1 The yellow LED in the button is now continuously lit.
Resetting the duration of therapy for phototherapy
1 Press button for 3 seconds.
2 The following message appears in the text display:
»Duration of phototherapy
Press OK to confirm reset«.
3 Press OK button = counter reset.
2 The display now reads:
»Duration of phototherapy
The counter is reset automatically when the unit is switched
off.
When using the radiant warmer in the »man.« (manual
mode):
Reduce the radiant warmer output level by about 3 incre-
●
ments compared to operation without phototherapy.
When using the radiant warmer in the »skin« (baby control
mode), the radiant warmer output is automatically adjusted to
the patient's heat requirements.
Switching off
4 Press button
5 The following message appears in the text display:
»Phototherapy turned OFF
Press OK button to confirm XX:XX:XX«.
6 Press OK button = phototherapy switched off.
4 The yellow LED in the button will go out.
XX:XX:XX«.
XX:XX:XX«.
XX:XX:XX
00:00:00«.
2
10
5
1
skin C manual mattress . C
skin
man .
1
5
10
5
1
skin C manual mattress . C
skin
man .
4
Operation
Babytherm 8010
15 min
C
< 36 C
3
Babytherm 8010
15 min
C
< 36 C
6
41