Nvr78-Rh Series - Dahua NVR100 series User Manual

Hide thumbs Also See for NVR100 series:

Table of Contents

① ①Use the screwdriver to loose the screws

of the rear panel and then remove the front

Connect to the HDD data cable to the main board

and the HDD port respectively. Loosen the power cable

of the chassis and connect another end of the power

cable to the HDD port.

3.4.7 NVR78-RH Series

①Turn the key into the hole in the front

② ②Put the HDD to the HDD bracket in

the chassis and then line up the four

screws to the four holes in the HDD.

Use the screwdriver to fix the screws

firmly to secure HDD on the HDD

After connect the cable, put the front cover

back to the device and then fix screws of the rear

②Open the front panel.